Forging Supplier to Lohr am Main — Bosch Rexroth's Global Hydraulics and Drive Technology Headquarters
Shivam Forge supplies EN 10204 3.1-certified alloy steel forgings — hydraulic cylinder end cap and piston rod forgings, valve body blanks, pump and motor housing components — to Tier 1 suppliers feeding Bosch Rexroth, headquartered in Lohr am Main, a global leader in hydraulic and electric drive and control technology serving mobile, industrial, and factory automation applications. Material grades: 42CrMo4, C45, 20MnCr5. IATF 16949 aligned quality, PPAP Level 3 documentation. CIF Hamburg with onward inland transport, or DDP Lohr am Main. Rajkot, India. Call +91-9265772827.
Bosch Rexroth, headquartered in Lohr am Main, Bavaria, is a global leader in hydraulic and electric drive and control technology, supplying components and systems for mobile equipment (construction machinery, agricultural equipment), industrial applications (presses, injection moulding machines), and factory automation across manufacturing industries worldwide. Hydraulic components — cylinders, valve bodies, pump and motor housings — operate under substantial working pressure (often 200-350 bar or higher in industrial applications), demanding forged blank quality that supports both the dimensional precision required for reliable high-pressure sealing and the structural strength to safely contain this pressure across the component's operational life.
Forged end cap and piston rod blanks (42CrMo4, C45) for hydraulic cylinder assemblies used in mobile equipment and industrial applications, machined to the dimensional precision and surface finish required for reliable high-pressure sealing across millions of cycles.
Forged valve body blanks for directional control and pressure relief valve products, engineered for the internal porting geometry and pressure containment strength Bosch Rexroth's hydraulic valve technology requires.
Structural housing forgings for hydraulic pump and motor assemblies, supporting the pressure containment and dimensional stability precision hydraulic power transmission components require.
As Bosch Rexroth expands its electric drive and linear motion technology alongside traditional hydraulics, forged structural and housing components for electric actuators represent a growing product category within the company's broader drive and control technology portfolio.
Hydraulic component forgings require dimensional tolerance and material integrity supporting reliable containment of substantial working pressures — a precision and structural strength requirement central to hydraulic system safety and reliability.
Production quality processes aligned to IATF 16949, including PPAP Level 3 documentation and process capability studies matched to the dimensional consistency requirements hydraulic component manufacturing demands.
Material test certificates confirming chemistry and mechanical properties for 42CrMo4, C45, and 20MnCr5 per EN 10204 3.1, issued as standard for every batch supplied into Lohr am Main-linked supply chains.
Consolidated ocean freight to Hamburg with onward inland transport to Lohr am Main (Bavaria), or DDP delivery direct to the customer's facility for suppliers preferring landed-cost simplicity.
Bosch Rexroth's global leadership position in hydraulic and drive technology, anchored at its Lohr am Main headquarters, places the company at the centre of a component category essential to an enormous range of downstream applications — construction and agricultural machinery, industrial presses, injection moulding equipment, and factory automation systems all depend on the hydraulic cylinders, valves, pumps, and motors that convert electrical or engine power into precisely controlled mechanical force. For forging suppliers, this breadth of end-application means Lohr am Main-linked component demand reaches across multiple downstream industries rather than concentrating in a single sector.
Hydraulic component engineering operates under a distinctive combination of requirements that differs from purely structural forging applications: cylinder end caps, valve bodies, and pump housings must simultaneously achieve the dimensional precision necessary for reliable high-pressure sealing (often maintaining seal integrity at working pressures exceeding 300 bar) and the structural strength to safely contain this pressure without failure across millions of operating cycles — a combination that places genuine demands on both forged blank dimensional consistency and the subsequent machining and finishing operations that achieve final sealing surface tolerance.
Bosch Rexroth's expansion into electric drive and linear motion technology, complementing its established hydraulic product range, reflects a broader industrial automation trend toward hybrid hydraulic-electric system architectures — hydraulics retaining advantages for high-force, robust mobile equipment applications, while electric drives offer precision positioning control increasingly valued in factory automation contexts. This creates forged component demand spanning both established hydraulic cylinder and valve components and emerging electric actuator structural parts within the same overall customer relationship.
For hydraulic and drive technology manufacturers sourcing forged cylinder, valve body, or pump/motor housing components for Bosch Rexroth's Lohr am Main-linked supply chains, or the wider German hydraulics industry, Shivam Forge offers the pressure-containment precision hydraulic components require. Contact our export engineering team at +91-9265772827 or sales@shivamforge.com with your drawing and specification for a quotation.
Bosch Rexroth is a global leader in hydraulic and electric drive and control technology, supplying components and systems for mobile equipment, industrial applications, and factory automation across manufacturing industries worldwide, headquartered in Lohr am Main.
Yes. Forged end cap and piston rod blanks machined to the dimensional precision and surface finish required for reliable high-pressure sealing across millions of cycles, in materials matched to the application's pressure rating requirements.
Industrial hydraulic applications commonly operate at 200-350 bar or higher working pressure, requiring forged blank quality that supports both dimensional precision for sealing reliability and structural strength for safe pressure containment.
Yes. As Bosch Rexroth expands its electric drive and linear motion technology alongside traditional hydraulics, we supply forged structural and housing components for electric actuators within the company's broader drive and control technology portfolio.
Standard routing is consolidated ocean freight to Hamburg with onward inland transport to Lohr am Main (Bavaria), or DDP delivery arranged directly to the customer's facility.
Why Choose Shivam Forge
Shivam Forge delivers precision hot-forged components from our integrated Shapar, Rajkot facility — covering forging, CNC machining, heat treatment, and quality inspection under one roof.
