Indian Forging Supplier — Sweden, Norway, Denmark & Nordic Countries

Forging Supplier Scandinavia | Indian Forgings Sweden Norway Denmark | Shivam Forge

Shivam Forge supplies certified precision forgings to Scandinavian manufacturers — Volvo Group, SKF, Sandvik, Alfa Laval, Equinor, Aker BP, and Nordic Mittelstand engineering. EN 10204 3.1, NORSOK M-650, SS-EN material grades. CIF Gothenburg / Oslo / Copenhagen in EUR or SEK/NOK. 30–40% cost saving.

Request Quote View Products

Volvo Group

World's Largest Commercial Vehicle OEM

NORSOK M-650

Norwegian Oil & Gas Standard

30–40%

Cost Saving vs Nordic Domestic

CIF Gothenburg

Primary Scandinavian Port

India's Forging Partner for the Nordic Industrial Economy

Scandinavia — Sweden, Norway, Denmark, and Finland — is one of the world's highest-quality industrial regions, characterised by technically demanding OEMs with deep engineering expertise. Volvo Group (Gothenburg) — trucks, buses, construction equipment, marine engines; SKF (Gothenburg) — world's largest bearing manufacturer; Sandvik (Sandviken) — cutting tools, mining equipment, specialty steel; Alfa Laval (Lund) — heat exchangers, separators; Equinor (Stavanger) and Aker BP — Norwegian North Sea oil & gas. All of these industries require precision certified forgings, and all are actively engaged in cost-reduction sourcing initiatives that include India. Shivam Forge supplies Nordic buyers with EN 10204 3.1 (SS-EN equivalent), NORSOK M-650 (for Norwegian oil & gas), and DIN EN certified forgings.

Scandinavian Industries We Supply Forgings To

Volvo Group — Gothenburg (Trucks, Buses, Construction Equipment)

Volvo Group — headquartered in Gothenburg, Sweden — is one of the world's largest commercial vehicle OEMs (Volvo Trucks, Renault Trucks, Mack Trucks, Volvo Buses) and construction equipment manufacturers (Volvo CE). Volvo's Tier 2 and Tier 3 suppliers require precision forged axle shafts, steering knuckles, wheel hub forgings, crankshaft blanks, and gearbox shaft forgings in 42CrMo4, C45E, 34CrNiMo6. PPAP/ISIR documentation, SS-EN 10204 3.1. CIF Gothenburg in SEK or EUR.

SKF — Gothenburg (Bearing Manufacturing Forgings)

SKF AB — the world's largest bearing manufacturer, headquartered in Gothenburg — uses forged bearing rings (inner and outer race blanks) in bearing steel 100Cr6 (1.3505, SS-EN ISO 683-17) and case-hardening steel 16MnCr5, as well as structural forgings for bearing housing bodies in C45E. SKF Tier 2 suppliers source precision forged bearing ring blanks for hard turning. Tight OD/ID tolerances +1.5/0.0 mm machining stock per side. EN 10204 3.1. CIF Gothenburg.

Sandvik AB — Mining & Rock Tools Supply Chain

Sandvik (Sandviken, Sweden) manufactures world-leading mining and rock excavation equipment (drill strings, DTH hammers, rock drill bits), cutting tools, and specialty steel. Sandvik's mining equipment supply chain requires precision forged drill steel blanks, DTH hammer body forgings, and rock drill bit shank forgings in high-strength alloy steels (Sandvik's own proprietary grades, 42CrMo4 equivalent, 34CrNiMo6). Tight surface quality (Ra ≤3.2 µm), EN 10204 3.1, UT per EN 10228.

Alfa Laval & Tetra Pak — Swedish Process Equipment

Alfa Laval (Lund, Sweden) — world leader in heat exchangers, separators, and fluid handling — uses stainless steel and duplex forgings for plate heat exchanger end plate forgings, separator rotor discs, and valve body forgings. SS 316L (1.4404), Duplex 2205 (1.4462), and titanium Grade 2 for aggressive chemical and food-grade process applications. SS-EN 10204 3.1 (Swedish national adoption of EN 10204). CIF Malmö or Gothenburg.

Equinor & Aker BP — Norwegian North Sea Oil & Gas (NORSOK)

Equinor (Stavanger) and Aker BP — Norway's major North Sea oil & gas operators — require forgings to NORSOK M-650 (Qualification of manufacturers of special materials) for subsea valve bodies, wellhead components, riser flanges, and subsea tree housing forgings. Duplex 2205 (22%Cr) and Super Duplex 2507 (25%Cr) forgings, NORSOK M-650 qualification of material supplier, NORSOK M-120 for stainless grades. EN 10204 3.1 + third-party inspection by DNV or Bureau Veritas. CIF Stavanger or Bergen.

Danish Shipping & Marine Equipment (Copenhagen, Odense)

Denmark's maritime industry — MAN Energy Solutions (Copenhagen — marine engines), A.P. Moller-Maersk (Copenhagen — container shipping operations), and Odense Steel Shipyard supply chain — requires precision forged marine engine components, propeller shaft flanges, rudder stock forgings, and anchor windlass forgings. Classification society certification: DNV GL, Bureau Veritas, Lloyd's Register as required. EN 10204 3.1. Ductile iron and carbon steel for most marine structural applications; stainless for corrosion-critical parts.

Scandinavian Logistics — Gothenburg, Oslo, Copenhagen

CIF Gothenburg (SEGOT) — 18–22 Days from Mundra

Gothenburg is Scandinavia's largest container port — handling ~70% of Swedish container imports. Mundra → Gothenburg: 18–22 days (via Suez). Weekly FCL services on Maersk (Gothenburg is a Maersk hub), MSC, CMA CGM. Road Gothenburg → Stockholm: 5 hours. Gothenburg → Malmö (Alfa Laval): 3 hours. Gothenburg → Sandviken (Sandvik): 4 hours. Gothenburg is the natural port for all Swedish industrial deliveries.

CIF Oslo (Aker Brygge) / Drammen — Norwegian Oil & Gas

For Norwegian buyers (Equinor, Aker BP supply chain in Stavanger, and Oslo-region engineering), Oslo Aker Brygge or Drammen port are alternatives to Gothenburg. Mundra → Oslo: 18–22 days. Or Gothenburg → Oslo by road (3 hours) for cargo cleared in Sweden. For Stavanger (oil & gas hub), some buyers route via Gothenburg + truck (5 hours to Stavanger). DNV-inspected cargo can be surveyed at Gothenburg port.

Air Freight to Stockholm Arlanda (ARN) or Oslo Gardermoen (OSL) — 2–4 Days

Air freight from Ahmedabad to Stockholm Arlanda (ARN) via Frankfurt or Dubai: 2–3 days. Air freight to Oslo Gardermoen (OSL): same transit. Excellent for first-article samples, prototype forgings, and urgent replacement parts for Scandinavian OEMs and oil & gas operators. SAS Cargo, Lufthansa Cargo (via FRA), and Emirates SkyCargo (via DXB) serve Stockholm and Oslo regularly.

India's Forging Partner for the Nordic Industrial Economy

Scandinavia's industrial economy is among the world's most technically sophisticated — anchored by global OEMs (Volvo Group, SKF, Sandvik, Alfa Laval) with world-leading quality standards, and a Norwegian oil & gas industry (Equinor, Aker BP) that sets some of the world's most demanding material qualification requirements (NORSOK standards). For Indian forging suppliers, Scandinavia represents a high-quality, high-value market where certification and technical credibility matter as much as price. Shivam Forge's EN 10204 3.1 certification, precision forging capability, and European export experience position it to serve Nordic industrial buyers effectively.

The Volvo Group supply chain alone represents one of the largest commercial vehicle forging markets in the world. Volvo Group (Volvo Trucks, Renault Trucks, Mack, Volvo CE, Volvo Buses, Volvo Penta) sources forged powertrain, chassis, and suspension components through a global Tier 2 supply chain that includes Swedish, German, Polish, and Indian forging suppliers. For Tier 2 and Tier 3 companies supplying Volvo Group, the key requirements are: SS-EN 10204 3.1 material certification, PPAP or ISIR first-article approval, Cpk ≥1.33 for critical characteristics, and consistent delivery performance. Shivam Forge's automotive quality system delivers all of these to Gothenburg (CIF) within 18–22 days from Mundra.

Norway's oil & gas sector — one of the world's most demanding for material quality — operates under NORSOK standards developed by the Norwegian Oil Industry Association. NORSOK M-650 (qualification of special material manufacturers) and NORSOK M-120 (material data sheets for structural steel) set the quality floor for forgings in subsea and offshore applications. Duplex 2205 and Super Duplex 2507 forgings for Equinor and Aker BP supply chains require not just EN 10204 3.1 material certification but third-party witness inspection by DNV, Bureau Veritas, or equivalent. Shivam Forge arranges DNV and BV inspector attendance at our Rajkot facility as required by Norwegian oil & gas buyers.

For Scandinavian buyers considering Shivam Forge as a forging supplier: the typical qualification journey is — RFQ and CIF Gothenburg quotation in EUR (same-day response), first-article order by air freight to Stockholm Arlanda or Oslo Gardermoen (2–3 days from Ahmedabad), quality evaluation at your incoming inspection against drawing and SS-EN 10204 3.1 certificate, then production volumes by ocean freight CIF Gothenburg. The qualification process takes 4–10 weeks end-to-end. Contact sales@shivamforge.com to start.

Frequently Asked Questions

Can you supply forgings for Volvo Group Tier 2 suppliers?

Yes. Precision forged components in 42CrMo4, C45E, 34CrNiMo6, and 16MnCr5 for Volvo Group (Volvo Trucks, Volvo CE, Volvo Buses) Tier 2 and Tier 3 supply chain companies are within our standard capability. PPAP/ISIR documentation, SS-EN 10204 3.1 material certificates, CMM dimensional inspection. CIF Gothenburg in SEK or EUR. Same-day quotation for standard components.

Can you supply NORSOK M-650 qualified forgings for Norwegian oil & gas?

NORSOK M-650 qualification requires the material manufacturer to be assessed by a third party (DNV, Bureau Veritas). Our EN 10204 3.1 certified Duplex 2205 and SS 316L forgings can be supplied with third-party inspection (DNV or BV inspection at Rajkot works) to meet the spirit of NORSOK M-650 for Equinor and Aker BP supply chain companies. For full NORSOK M-650 qualification, discuss requirements with our quality team — we can arrange third-party assessment.

Do you supply SKF bearing ring forgings (100Cr6)?

Yes. Bearing ring forgings in 100Cr6 (1.3505, SS-EN ISO 683-17) for inner and outer race blanks are within our capability. Hard-turning-ready forging blanks with +1.5/0.0 mm machining stock per side on OD and ID. Carbon content uniformity ±0.05% across cross-section. EN 10204 3.1 with OES chemistry. CIF Gothenburg. Contact us with your bearing ring dimensions and annual volume for a SEK/EUR quotation.

What port do you use for Scandinavian exports?

Gothenburg (SEGOT) is our standard Scandinavian port — largest container port in Scandinavia, 18–22 days from Mundra. For Norway (Stavanger, Bergen, Oslo), we route CIF Gothenburg + truck, or quote CIF Oslo/Drammen. For Denmark (Copenhagen, Odense), CIF Gothenburg + truck or CIF Hamburg + ferry. Air freight to Stockholm Arlanda or Oslo Gardermoen: 2–3 days from Ahmedabad for urgent deliveries.

Can you supply marine forging components (DNV, Bureau Veritas certified)?

Yes. Precision forgings for marine engine components (MAN Energy Solutions, Wärtsilä supply chains), propeller shaft flanges, and marine structural forgings with classification society witness inspection (DNV GL, Bureau Veritas, Lloyd's Register, ABS) are within our capability. We arrange third-party surveyor attendance at our Rajkot facility for in-process and final inspection. EN 10204 3.2 (countersigned by third-party inspector) for class-required documentation.

What is the lead time for Scandinavian delivery?

Production: 3–8 weeks. Ocean Mundra → Gothenburg: 18–22 days. Customs clearance + road delivery to Swedish factory: 2–3 days. Total: 7–13 weeks. For Norwegian oil & gas (via Gothenburg + truck to Stavanger): 18–22 days ocean + 5 hours road. Air freight first-article to Stockholm: production + 2–3 days. Buffer stock for repeat orders: 18–22 days ocean only.

Do you invoice in SEK, NOK, or EUR?

We can invoice in EUR (most common for Scandinavian export), USD, or SEK/NOK if preferred. EUR invoicing is most common for Scandinavian trade — Scandinavian buyers with EUR accounts prefer EUR to avoid SEK/NOK conversion. Quotes valid 30 days at the prevailing exchange rate. SWIFT T/T from Scandinavian banks (Nordea, Swedbank, DNB, Handelsbanken, Danske Bank) or Letter of Credit accepted.

Can you supply Sandvik mining equipment supply chain forgings?

Yes. High-strength forged components for mining drill strings, DTH hammer bodies, and rock drill bit shanks in 42CrMo4, 34CrNiMo6, and custom high-strength alloy steels are within our capability. EN 10204 3.1, UT per EN 10228-3, tight dimensional tolerances (±0.1 mm on critical diameters). CIF Gothenburg, road to Sandviken. Contact us with your material specification and drawing.

Why Choose Shivam Forge

Trusted forging manufacturer — Rajkot, Gujarat

Shivam Forge delivers precision hot-forged components from our integrated Shapar, Rajkot facility — covering forging, CNC machining, heat treatment, and quality inspection under one roof.

Hot forging from quality alloy steel billets (42CrMo4, C45, EN8, SS316L)
In-house CNC/VMC machining to drawing — ±0.05mm tolerances
Heat treatment — normalizing, hardening, tempering, annealing
CMM inspection and full EN 10204 3.1 material certification
Custom OEM forging from customer drawings — PPAP/ISIR available
Fast export from Mundra Port — CIF worldwide, FOB India
Export expertise — Europe, Middle East, Americas, Asia-Pacific